挨打的发生发生的方式The circled drawing shows where to look. The physical sample shows how the lid moves into place.
-
Address: Mold city Huangyan,CN 318020
-
Phone: + 86 159-6865-2523
-
Email: sales@plasticmoulds.net
Blog
Why Your Mold Supplier Can’t Always Suggest a Design Fix
A buyer sent me a plastic part design for review. I marked an area on the drawing because I saw a problem.His reply was straightforward.“What would be the suggestion?”I understood the question. When you ask a mold supplier to review…
Injection Molding Quotes: What We Need and What Happens Next
Buyer Guide · First-Time Injection MoldingWe went back and read 105 first emails from people who had never done injection molding before. The oldest was from 2010. The newest came in last week. No names, no company names, no product…
PEEK Injection Molding
High-Temperature PlasticsPEEK injection molding turns the most heat-resistant melt-processable plastic into complex parts at production volume. The melt runs at 360–400°C. The mold itself sits at 160–200°C, hotter than the melt point of most commodity resins. Shops without high-temperature barrels,…
How an Integrated Engel Cell Targets Low-Cost Competition
High-Volume Molding Analysis57,600 Parts an Hour: How an Integrated Engel Cell Targets Low-Cost Competition in High-Volume MoldingAt Fakuma 2026, an all-electric Engel production cell is molding 57,600 automotive connectors per hour on an 8-second cycle. The setup runs a 128-cavity…
Injection Mold Tool Life and How Long a Mold Really Lasts
Mold EngineeringInjection Mold Tool Life and How Long a Mold Really LastsInjection mold tool life is the number of good shots a mold makes before it needs major repair. Most buyers hear one number from a supplier and file it…
PP Injection Molding: Grades, Shrinkage, Processing Specs and Real Part Costs
Injection Molding Material GuidePP Injection Molding: Grades, Shrinkage, Processing Specs and Real Part CostsYour first articles land and the 120mm dimension measures 118.3mm. The drawing says ±0.3mm. Before you email the mold shop about bad steel, check the resin you…
Injection Mold Design Guide: Gates, Cooling & Ejection
Mold Design · Engineering GuideMost “mold design” articles are really part design articles. Wall thickness, ribs, draft. That’s useful, and we cover it on our plastic part design page.This one is about the tool itself. The steel. Where the plastic…
polycarbonate injection molding runner gate design
PC Mold DesignPC Runner and Gate Design That Stops Splay, Cold Slugs and CrackingMost polycarbonate defects are designed into the tool, not created at the press. PC runner and gate design decides whether a clear part shows splay, cold slugs…
Injection Molding Learning Center | 26 Engineering Topics
Learning CenterInjection molding, 26 topicsMost molding questions come back to the same handful of numbers. How thick the wall should be. How much draft before the part drags on the core. Why a quote doubled after somebody added one snap…