Product Weight Calculator

Product Volume (cm³): Select Material (Corrected Densities): Polyethylene (PE) – 0.95 g/cm³ Polypropylene (PP) – 0.91 g/cm³ Polystyrene (PS) – 1.05 g/cm³ Polycarbonate (PC) – 1.20 g/cm³ Acrylonitrile Butadiene Styrene (ABS) – 1.06 g/cm³ Polyvinyl Chloride (PVC) – 1.38 g/cm³ Polyamide (Nylon, PA66) – 1.14 g/cm³

Cycle Time Calculator

Injection Time (seconds): Cooling Time (seconds): Ejection Time (seconds):

Clamping Force Calculator

Injection Pressure (MPa): Projected Part Area (cm²):

Fill Time Calculator

Mold Cavity Volume (cm³): Injection Rate (cm³/s):

Cooling Time Calculator (Corrected)

Max. Wall Thickness (mm): Select Material (Thermal Diffusivity): Polyethylene (PE) – 0.15 mm²/s Polypropylene (PP) – 0.10 mm²/s Polystyrene (PS) – 0.12 mm²/s Polycarbonate (PC) – 0.14 mm²/s Acrylonitrile Butadiene Styrene (ABS) – 0.13 mm²/s Polyvinyl Chloride (PVC) – 0.08 mm²/s Polyamide (Nylon) – 0.11 mm²/s

Mold Life Calculator (Corrected)

Allowable Wear (mm): Wear Rate (mm/cycle):

Injection Pressure Calculator (Corrected)

Injection Force (N): Screw Area (cm²):

Shrinkage Rate Calculator

Mold Dimension (e.g., mm): Final Part Dimension (e.g., mm):